Transition Networks DVP 5140K Manual de usuario descargar pdf (Pagina 24)

2.8 Connecting to TCP/IP Network Management at

Remote Network Management Station (NMS)

It is recommended that the Multichannel Media Converter RJ-45

MANAGEMENT port be connected to the TCP/IP network management

station (NMS) through a switch or a hub that also is connected to other

managed network devices. If the Multichannel Media Converter RJ-45

MANAGEMENT port is connected directly to the NMS, the NMS will

manage only that Multichannel Media Converter.

1. Locate or build a 10BASE-T-compliant twisted-pair shielded cable

with RJ-45 plug connectors installed at both ends.

NOTE: Straight-through or crossover cable can be used, since the

Multichannel Media Converter provides either an RJ-45 10BASE-T

Ethernet port with an associated MDI-II/MDI-X switch or two

RJ-45 10BASE-T ports, one configured as straight-through and the

other configured as crossover, for connecting the Multichannel

Media Converter to TCP/IP network management.

2. Connect RJ-45 connector at one end of cable to Multichannel

Media Converter RJ-45 twisted-pair Management port.

3. Connect RJ-45 connector at other end of cable to RJ-45 port on

10BASE-T-compliant hub or switch.

4. Verify that the Multichannel Media Converter MANAGEMENT

L(i)NK LED is illuminated. If not, change the MDI-II/MDI-X switch

setting or the position of the RJ-45 shielded cable connection.

5. Verify that the appropriate LINK indicator on the hub or switch is

illuminated.

NOTE: If installing Multiport Management Software at the NMS,

skip the following steps and proceed to the next section.

6. Referring to documentation that comes with the NMS

management application, copy the MIB file (SUPPLIED - located

on the Multiport Management Software to the default NMS

management application directory.

7. Again referring to documentation that comes with the NMS

management application, add the new MIB to the NMS

management application list and recompile the MIBs.

2.14

METTF10xx, MFETF10xx

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Sin comentarios

Transition Networks DVP 5140K Manual de usuario Pagina 24