Transition Networks SDSFE31XX-100 Manual de usuario descargar pdf (Pagina 34)

Transition Networks SDSFE31xx-100 Industrial Device Server

24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600

Light emitting diodes (LEDs)

LEDs

The Device Server has LED indicators located on its front panel. The LEDs present

at-a-glance network status, and provide real-time connectivity information. Figure 15

shows the LEDs and a chart that explains the function of each.

LED Description

1 Power (PWR) Lights green when input power is good

2 Redundant Power (RPS) Lights green when receiving external power from

redundant input source

3 Alarm (ALM) Lights red, signaling an alarm (when an external

alarm is connected) during a down link condition on

any port, or during primary/redundant power failures

4 LNK/ACT Lights green when connected to another device.

Flashes (amber) to indicate when the fiber port

receives link pulses from a compliant device (fiber

port only).

5 ACT Lights to indicate when the serial port is receiving

link pulses or data from a compliant device

6 POST Lights (amber) when the Power on Self Test was

successful; flashes when performing the POST

7 100 Lights (amber) to indicate when receiving data from

at 100Mbps (fiber port only)

Figure 15: LEDs and Description Chart

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 85 86

Sin comentarios

Transition Networks SDSFE31XX-100 Manual de usuario Pagina 34