Transition-networks E-PSW-TX-02 Manual de usuario Pagina 1

TRANSITION NETWORKS’ POCKET SWITCHTECHNICAL SPECIFICATIONSStandardsIEEE 802.3, IEEE 802.3uDimension4.75" X 5.75" X 1.0" (120mm x 146mm

Doubling Bandwidth by Installing Full-DuplexNOTE: The 10BASE-T specification requires two dedicated twistedcopper wire pairs for data transmission and

Installing Network Cable(continued)Straight-Through/Crossover (10BASE-T /100BASE-TX)The most popular wiring used today, unshielded twisted-pair copper

Increasing Bandwidth Ten-fold by Installing100BASE-TX (Fast Ethernet)Fast Ethernet, 100BASE-TX or 100BASE-FX on the Transition Networks’pocket switch,

The Transition Networks pocket switch can be installed to provide one10BASE-T switched port and one 100BASE-TX switched port.Auto-NegotiationThe 100BA

Increasing Network Distance by Installing100BASE-FXFiber Fast Ethernet, 100BASE-FX, can be used for links to the TransitionNetworks’ pocket switch, pa

Setting DIP SwitchNOTE: The Auto-Negotiation system is designed so that a twisted-pairlink will not become operational until matching capabilities exi

2. SITE CONSIDERATIONSThe site for the Transition Networks’ pocket switch must provide:• AC power outlet for each Transition Networks’ pocket switch•

100BASE-FX Cable and Connector SpecificationsThe physical characteristics of the 100BASE-FX cable must meet or exceed IEEE802.3u 100BASE-FX specificat

ETHERNET CABLE SPECIFICATIONS10BASE-T/100BASE-TX Cable and ConnectorSpecificationsThe physical characteristics of the 10BASE-T /100BASE-TX cable andco

1. INTRODUCTIONThis guide is intended for the system or network administratorresponsible for installing and monitoring a Transition Networks’ pocketsw

The Evolving Ethernet NetworkInstalling one Transition Networks’ pocket switch alone improvesnetwork performance. Installing additional Fast Ethernet

Network FlexibilityThe Transition Networks’ pocket switch can assist a networkadministrator in maintaining existing resources as the network evolvesfr

4. OPERATIONThe Transition Networks’ pocket switch requires no operatorintervention beyond occasionally monitoring LED status indicators.POWER Steady

Increasing Bandwidth by Segmenting 10BASE-TCollision DomainThe Transition Networks’ pocket switch adapts to the fact that eachEthernet network device

Installing Network Cable(continued)Connecting Fiber Cable to TX/RX Connectors (100BASE-FX)Effective cable distances are determined by ambient RF noise