techsu
INSTALLATION
Installing the Cable
FIBER
1. Locate or build 10Base-FL or 100Base-SX compliant fiber cable with
male, two-stranded TX to RX connectors installed at both ends.
2. Connect the fiber cables to SSETF10xx-200 Media Converter as
described:
• Connect the male TX cable connector the female TX port.
• Connect the male RX cable connector to the female RX port.
3. Connect the fiber cables to the other device (another Media Converter,
hub, etc.) as described:
• Connect the male TX cable connector the female RX port.
• Connect the male RX cable connector to the female TX port.
COPPER
1. Locate or build 10Base-T or 100Base-TX compliant copper cables with
male, RJ-45 connectors installed at both ends.
2. Connect the RJ-45 connector at one end of the cable to the RJ-45 port on
the SSETF10xx-200 Media Converter.
3. Connect the RJ-45 connector at the other end of the cable to the RJ-45
port on the other device (switch, workstation, etc.).
Connect the fiber cable
to the Media Converter
as shown.
Connect the fiber cable
to the other device
(media converter,
hub, etc.) as shown
RX
TX
RX
TX
RJ-45 port
on the Media
Converter
RJ-45 port
on the other device
(switch, work station, etc.)
4
SSETF10xx-200
Tech Su
ort: 800-260-1312 International: 952-941-7600 7am-6
m CST
GMT-6:00
INSTALLATION -- Continued
Power the Media Converter
1. Install the power adapter cord to the back of the Media Converter.
2. Connect the power adapter plug to AC power.
3. Verify that the Media Converter is powered by observing the illuminated
LED power indicator light.
OPERATION
Using Status LEDs
Use the status LEDs to monitor the SSETF10xx-200 Media Converter
operation in the network.
100 Speed Dark LED indicates 10 Mb/s operation.
Slow blinking LED indicates speed is not yet
selected.
Fast blinking LED indicates 100 Mb/s.
PWR Power Steady LED indicates connection to the external
AC power.
RXF Fiber Receive Flashing LED indicates reception of the data on
the fiber link.
LKF Fiber Link Steady LED indicates fiber link connection.
Dark LED indicates a lack of power OR a downed
link.
RXC Copper Receive Flashing LED indicates data reception on the
copper link.
LKC Copper Link Steady LED indicates copper link connection.
Dark LED indicates a lack of power OR a downed
link.
PWRRXF RXC
SDF
10/100-TX
SDC
10/100-FL/SX
100
(2 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales